Tech Talk

This only applies to current CANTCU customers using Boostec, Future 1.21+ versions of firmware will have these standards already. To enable CANTCU on your configuration, Please open this unpopulated.CUD in calibrator And copy over these canbus items: Right-click on...

Ford Ranger (Gen3 / Next Gen) Stop/Start off installation     Step 1: Ensure the vehicle is completely turned off, Get good access to the center console and lift the trim for the gear stick surrounds from the front using your fingers.   Step 2: Find the...

Anytime DIFFLOCK for: Mitsubishi Triton MQ / MR with the 4n15 engine and factory diff-lock. ________________________________________________________ Please be advised that while all necessary precautions have been taken, we cannot accept any responsibility for the...

Anytime DIFFLOCK fitting instructions for: ISUZU D-MAX 2021+, MAZDA BT-50 2021+ with 4JJ3 engine and factory diff-lock. ________________________________________________________ Please be advised that while all necessary precautions have been taken, we cannot accept...

Please use these settings for 8hp / CANBUS Automatic transmit: 1mbit preferred BOOSTEC requested information from auto controllers: Transmit: 0x556 for GEAR indicator U8 (Reference name in BOOSTEC: ATCMDGEAR) Offset 0 Details: 0 for neutral 1-8 for forward gears And...

The FTE Handbook (v1 pre-release notes): (Purchase links will be added here as stock becomes available, estimated to be: 26 May 2024 for all parts to be store-purchased, we will run a pre-launch discount code for all parts in the FTE range, if you would like to be a...

This concerns kits and switches delivered to DMAX owners with 2021-2024 models in the date range: 11th APRIL 2024          to           24 APRIL 2024 MUX owners and DMAX 4jj1 owners should be unaffected. Video link for re-pin: https://youtu.be/X4TQYxCKKJo DMAX...

So you've got an unusual combination that hasn't been done before. In this case, you've added a cam sensor to an engine that has never had one... You know you don't have hall sensors for CRANK and CAM so you're running our amplifier boards (As delivered). Everything...

Calibrator now includes the ability to upgrade controller firmware in one step right inside Calibrator, and that step also includes converting the existing MOD file you have on the ECU to match the new firmware.         Upgrading the firmware...